Artificial Intelligence Nanodegree

Convolutional Neural Networks

Project: Write an Algorithm for a Dog Identification App


In this notebook, some template code has already been provided for you, and you will need to implement additional functionality to successfully complete this project. You will not need to modify the included code beyond what is requested. Sections that begin with '(IMPLEMENTATION)' in the header indicate that the following block of code will require additional functionality which you must provide. Instructions will be provided for each section, and the specifics of the implementation are marked in the code block with a 'TODO' statement. Please be sure to read the instructions carefully!

Note: Once you have completed all of the code implementations, you need to finalize your work by exporting the iPython Notebook as an HTML document. Before exporting the notebook to html, all of the code cells need to have been run so that reviewers can see the final implementation and output. You can then export the notebook by using the menu above and navigating to \n", "File -> Download as -> HTML (.html). Include the finished document along with this notebook as your submission.

In addition to implementing code, there will be questions that you must answer which relate to the project and your implementation. Each section where you will answer a question is preceded by a 'Question X' header. Carefully read each question and provide thorough answers in the following text boxes that begin with 'Answer:'. Your project submission will be evaluated based on your answers to each of the questions and the implementation you provide.

Note: Code and Markdown cells can be executed using the Shift + Enter keyboard shortcut. Markdown cells can be edited by double-clicking the cell to enter edit mode.

The rubric contains optional "Stand Out Suggestions" for enhancing the project beyond the minimum requirements. If you decide to pursue the "Stand Out Suggestions", you should include the code in this IPython notebook.


Why We're Here

In this notebook, you will make the first steps towards developing an algorithm that could be used as part of a mobile or web app. At the end of this project, your code will accept any user-supplied image as input. If a dog is detected in the image, it will provide an estimate of the dog's breed. If a human is detected, it will provide an estimate of the dog breed that is most resembling. The image below displays potential sample output of your finished project (... but we expect that each student's algorithm will behave differently!).

Sample Dog Output

In this real-world setting, you will need to piece together a series of models to perform different tasks; for instance, the algorithm that detects humans in an image will be different from the CNN that infers dog breed. There are many points of possible failure, and no perfect algorithm exists. Your imperfect solution will nonetheless create a fun user experience!

The Road Ahead

We break the notebook into separate steps. Feel free to use the links below to navigate the notebook.

  • Step 0: Import Datasets
  • Step 1: Detect Humans
  • Step 2: Detect Dogs
  • Step 3: Create a CNN to Classify Dog Breeds (from Scratch)
  • Step 4: Use a CNN to Classify Dog Breeds (using Transfer Learning)
  • Step 5: Create a CNN to Classify Dog Breeds (using Transfer Learning)
  • Step 6: Write your Algorithm
  • Step 7: Test Your Algorithm

Step 0: Import Datasets

Import Dog Dataset

In the code cell below, we import a dataset of dog images. We populate a few variables through the use of the load_files function from the scikit-learn library:

  • train_files, valid_files, test_files - numpy arrays containing file paths to images
  • train_targets, valid_targets, test_targets - numpy arrays containing onehot-encoded classification labels
  • dog_names - list of string-valued dog breed names for translating labels
In [1]:
from sklearn.datasets import load_files       
from keras.utils import np_utils
import numpy as np
from glob import glob

# define function to load train, test, and validation datasets
def load_dataset(path):
    data = load_files(path)
    dog_files = np.array(data['filenames'])
    dog_targets = np_utils.to_categorical(np.array(data['target']), 133)
    return dog_files, dog_targets

# load train, test, and validation datasets
train_files, train_targets = load_dataset('dogImages/train')
valid_files, valid_targets = load_dataset('dogImages/valid')
test_files, test_targets = load_dataset('dogImages/test')

# load list of dog names
dog_names = [item[20:-1] for item in sorted(glob("dogImages/train/*/"))]

# print statistics about the dataset
print('There are %d total dog categories.' % len(dog_names))
print('There are %s total dog images.\n' % len(np.hstack([train_files, valid_files, test_files])))
print('There are %d training dog images.' % len(train_files))
print('There are %d validation dog images.' % len(valid_files))
print('There are %d test dog images.'% len(test_files))
Using TensorFlow backend.
There are 133 total dog categories.
There are 8351 total dog images.

There are 6680 training dog images.
There are 835 validation dog images.
There are 836 test dog images.

Import Human Dataset

In the code cell below, we import a dataset of human images, where the file paths are stored in the numpy array human_files.

In [2]:
import random
random.seed(8675309)

# load filenames in shuffled human dataset
human_files = np.array(glob("lfw/*/*"))
random.shuffle(human_files)

# print statistics about the dataset
print('There are %d total human images.' % len(human_files))
There are 13233 total human images.

Step 1: Detect Humans

We use OpenCV's implementation of Haar feature-based cascade classifiers to detect human faces in images. OpenCV provides many pre-trained face detectors, stored as XML files on github. We have downloaded one of these detectors and stored it in the haarcascades directory.

In the next code cell, we demonstrate how to use this detector to find human faces in a sample image.

In [3]:
import cv2                
import matplotlib.pyplot as plt                        
%matplotlib inline                               

# extract pre-trained face detector
face_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_frontalface_alt.xml')

# load color (BGR) image
img = cv2.imread(human_files[3])
# convert BGR image to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)

# find faces in image
faces = face_cascade.detectMultiScale(gray)

# print number of faces detected in the image
print('Number of faces detected:', len(faces))

# get bounding box for each detected face
for (x,y,w,h) in faces:
    # add bounding box to color image
    cv2.rectangle(img,(x,y),(x+w,y+h),(255,0,0),2)
    
# convert BGR image to RGB for plotting
cv_rgb = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)

# display the image, along with bounding box
plt.imshow(cv_rgb)
plt.show()
Number of faces detected: 1

Before using any of the face detectors, it is standard procedure to convert the images to grayscale. The detectMultiScale function executes the classifier stored in face_cascade and takes the grayscale image as a parameter.

In the above code, faces is a numpy array of detected faces, where each row corresponds to a detected face. Each detected face is a 1D array with four entries that specifies the bounding box of the detected face. The first two entries in the array (extracted in the above code as x and y) specify the horizontal and vertical positions of the top left corner of the bounding box. The last two entries in the array (extracted here as w and h) specify the width and height of the box.

Write a Human Face Detector

We can use this procedure to write a function that returns True if a human face is detected in an image and False otherwise. This function, aptly named face_detector, takes a string-valued file path to an image as input and appears in the code block below.

In [4]:
# returns "True" if face is detected in image stored at img_path
def face_detector(img_path):
    img = cv2.imread(img_path)
    gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
    faces = face_cascade.detectMultiScale(gray)
    return len(faces) > 0

(IMPLEMENTATION) Assess the Human Face Detector

Question 1: Use the code cell below to test the performance of the face_detector function.

  • What percentage of the first 100 images in human_files have a detected human face?
  • What percentage of the first 100 images in dog_files have a detected human face?

Ideally, we would like 100% of human images with a detected face and 0% of dog images with a detected face. You will see that our algorithm falls short of this goal, but still gives acceptable performance. We extract the file paths for the first 100 images from each of the datasets and store them in the numpy arrays human_files_short and dog_files_short.

Answer:

  • Human images with a detected human face: 98.0 %
  • Dog images with a detected human face: 11.0 %
In [15]:
human_files_short = human_files[:100]
dog_files_short = train_files[:100]
# Do NOT modify the code above this line.

## TODO: Test the performance of the face_detector algorithm 
## on the images in human_files_short and dog_files_short.
human_face_in_human_files = 0
human_face_in_dog_files = 0

for file in human_files_short:
    if face_detector(file):
        human_face_in_human_files += 1

for file in dog_files_short:        
    if face_detector(file):
        human_face_in_dog_files += 1

print('Human images with a detected human face:', (human_face_in_human_files * 100) / len(human_files_short), '%')
print('Dog images with a detected human face:', (human_face_in_dog_files * 100) / len(dog_files_short), '%')
Human images with a detected human face: 98.0 %
Dog images with a detected human face: 11.0 %

Question 2: This algorithmic choice necessitates that we communicate to the user that we accept human images only when they provide a clear view of a face (otherwise, we risk having unneccessarily frustrated users!). In your opinion, is this a reasonable expectation to pose on the user? If not, can you think of a way to detect humans in images that does not necessitate an image with a clearly presented face?

Answer: This exectation might hamper the user experience of the app. We can do image augmentation to make the model robust enough to identify faces in images with variations in the way a face is presented.

We suggest the face detector from OpenCV as a potential way to detect human images in your algorithm, but you are free to explore other approaches, especially approaches that make use of deep learning :). Please use the code cell below to design and test your own face detection algorithm. If you decide to pursue this optional task, report performance on each of the datasets.

In [ ]:
## (Optional) TODO: Report the performance of another  
## face detection algorithm on the LFW dataset
### Feel free to use as many code cells as needed.

Step 2: Detect Dogs

In this section, we use a pre-trained ResNet-50 model to detect dogs in images. Our first line of code downloads the ResNet-50 model, along with weights that have been trained on ImageNet, a very large, very popular dataset used for image classification and other vision tasks. ImageNet contains over 10 million URLs, each linking to an image containing an object from one of 1000 categories. Given an image, this pre-trained ResNet-50 model returns a prediction (derived from the available categories in ImageNet) for the object that is contained in the image.

In [7]:
from keras.applications.resnet50 import ResNet50

# define ResNet50 model
ResNet50_model = ResNet50(weights='imagenet')

Pre-process the Data

When using TensorFlow as backend, Keras CNNs require a 4D array (which we'll also refer to as a 4D tensor) as input, with shape

$$ (\text{nb_samples}, \text{rows}, \text{columns}, \text{channels}), $$

where nb_samples corresponds to the total number of images (or samples), and rows, columns, and channels correspond to the number of rows, columns, and channels for each image, respectively.

The path_to_tensor function below takes a string-valued file path to a color image as input and returns a 4D tensor suitable for supplying to a Keras CNN. The function first loads the image and resizes it to a square image that is $224 \times 224$ pixels. Next, the image is converted to an array, which is then resized to a 4D tensor. In this case, since we are working with color images, each image has three channels. Likewise, since we are processing a single image (or sample), the returned tensor will always have shape

$$ (1, 224, 224, 3). $$

The paths_to_tensor function takes a numpy array of string-valued image paths as input and returns a 4D tensor with shape

$$ (\text{nb_samples}, 224, 224, 3). $$

Here, nb_samples is the number of samples, or number of images, in the supplied array of image paths. It is best to think of nb_samples as the number of 3D tensors (where each 3D tensor corresponds to a different image) in your dataset!

In [10]:
from keras.preprocessing import image                  
from tqdm import tqdm

def path_to_tensor(img_path):
    # loads RGB image as PIL.Image.Image type
    img = image.load_img(img_path, target_size=(224, 224))
    # convert PIL.Image.Image type to 3D tensor with shape (224, 224, 3)
    x = image.img_to_array(img)
    # convert 3D tensor to 4D tensor with shape (1, 224, 224, 3) and return 4D tensor
    return np.expand_dims(x, axis=0)

def paths_to_tensor(img_paths):
    list_of_tensors = [path_to_tensor(img_path) for img_path in tqdm(img_paths)]
    return np.vstack(list_of_tensors)

Making Predictions with ResNet-50

Getting the 4D tensor ready for ResNet-50, and for any other pre-trained model in Keras, requires some additional processing. First, the RGB image is converted to BGR by reordering the channels. All pre-trained models have the additional normalization step that the mean pixel (expressed in RGB as $[103.939, 116.779, 123.68]$ and calculated from all pixels in all images in ImageNet) must be subtracted from every pixel in each image. This is implemented in the imported function preprocess_input. If you're curious, you can check the code for preprocess_input here.

Now that we have a way to format our image for supplying to ResNet-50, we are now ready to use the model to extract the predictions. This is accomplished with the predict method, which returns an array whose $i$-th entry is the model's predicted probability that the image belongs to the $i$-th ImageNet category. This is implemented in the ResNet50_predict_labels function below.

By taking the argmax of the predicted probability vector, we obtain an integer corresponding to the model's predicted object class, which we can identify with an object category through the use of this dictionary.

In [11]:
from keras.applications.resnet50 import preprocess_input, decode_predictions

def ResNet50_predict_labels(img_path):
    # returns prediction vector for image located at img_path
    img = preprocess_input(path_to_tensor(img_path))
    return np.argmax(ResNet50_model.predict(img))

Write a Dog Detector

While looking at the dictionary, you will notice that the categories corresponding to dogs appear in an uninterrupted sequence and correspond to dictionary keys 151-268, inclusive, to include all categories from 'Chihuahua' to 'Mexican hairless'. Thus, in order to check to see if an image is predicted to contain a dog by the pre-trained ResNet-50 model, we need only check if the ResNet50_predict_labels function above returns a value between 151 and 268 (inclusive).

We use these ideas to complete the dog_detector function below, which returns True if a dog is detected in an image (and False if not).

In [12]:
### returns "True" if a dog is detected in the image stored at img_path
def dog_detector(img_path):
    prediction = ResNet50_predict_labels(img_path)
    return ((prediction <= 268) & (prediction >= 151)) 

(IMPLEMENTATION) Assess the Dog Detector

Question 3: Use the code cell below to test the performance of your dog_detector function.

  • What percentage of the images in human_files_short have a detected dog?
  • What percentage of the images in dog_files_short have a detected dog?

Answer:

  • Human images with a detected dog face: 1.0 %
  • Dog images with a detected dog face: 100.0 %
In [17]:
### TODO: Test the performance of the dog_detector function
### on the images in human_files_short and dog_files_short.
dog_face_in_human_files = 0
dog_face_in_dog_files = 0

for file in human_files_short:
    if dog_detector(file):
        dog_face_in_human_files += 1

for file in dog_files_short:        
    if dog_detector(file):
        dog_face_in_dog_files += 1

print('Human images with a detected dog face:', (dog_face_in_human_files * 100) / len(human_files_short), '%')
print('Dog images with a detected dog face:', (dog_face_in_dog_files * 100) / len(dog_files_short), '%')
Human images with a detected dog face: 1.0 %
Dog images with a detected dog face: 100.0 %

Step 3: Create a CNN to Classify Dog Breeds (from Scratch)

Now that we have functions for detecting humans and dogs in images, we need a way to predict breed from images. In this step, you will create a CNN that classifies dog breeds. You must create your CNN from scratch (so, you can't use transfer learning yet!), and you must attain a test accuracy of at least 1%. In Step 5 of this notebook, you will have the opportunity to use transfer learning to create a CNN that attains greatly improved accuracy.

Be careful with adding too many trainable layers! More parameters means longer training, which means you are more likely to need a GPU to accelerate the training process. Thankfully, Keras provides a handy estimate of the time that each epoch is likely to take; you can extrapolate this estimate to figure out how long it will take for your algorithm to train.

We mention that the task of assigning breed to dogs from images is considered exceptionally challenging. To see why, consider that even a human would have great difficulty in distinguishing between a Brittany and a Welsh Springer Spaniel.

Brittany Welsh Springer Spaniel

It is not difficult to find other dog breed pairs with minimal inter-class variation (for instance, Curly-Coated Retrievers and American Water Spaniels).

Curly-Coated Retriever American Water Spaniel

Likewise, recall that labradors come in yellow, chocolate, and black. Your vision-based algorithm will have to conquer this high intra-class variation to determine how to classify all of these different shades as the same breed.

Yellow Labrador Chocolate Labrador Black Labrador

We also mention that random chance presents an exceptionally low bar: setting aside the fact that the classes are slightly imabalanced, a random guess will provide a correct answer roughly 1 in 133 times, which corresponds to an accuracy of less than 1%.

Remember that the practice is far ahead of the theory in deep learning. Experiment with many different architectures, and trust your intuition. And, of course, have fun!

Pre-process the Data

We rescale the images by dividing every pixel in every image by 255.

In [18]:
from PIL import ImageFile                            
ImageFile.LOAD_TRUNCATED_IMAGES = True                 

# pre-process the data for Keras
train_tensors = paths_to_tensor(train_files).astype('float32')/255
valid_tensors = paths_to_tensor(valid_files).astype('float32')/255
test_tensors = paths_to_tensor(test_files).astype('float32')/255
100%|██████████| 6680/6680 [00:50<00:00, 133.23it/s]
100%|██████████| 835/835 [00:05<00:00, 147.15it/s]
100%|██████████| 836/836 [00:05<00:00, 149.29it/s]

(IMPLEMENTATION) Model Architecture

Create a CNN to classify dog breed. At the end of your code cell block, summarize the layers of your model by executing the line:

    model.summary()

We have imported some Python modules to get you started, but feel free to import as many modules as you need. If you end up getting stuck, here's a hint that specifies a model that trains relatively fast on CPU and attains >1% test accuracy in 5 epochs:

Sample CNN

Question 4: Outline the steps you took to get to your final CNN architecture and your reasoning at each step. If you chose to use the hinted architecture above, describe why you think that CNN architecture should work well for the image classification task.

Answer: I've used 3 convolution layers with filter sizes 8, 16 and 32, keeping the kernel size the same (3x3). Kernel size was determined based on trial and error. Increasing number of filters help the CNN progressively learn more complex features. Padding is set to 'same', which is known to give good results. Activation used is 'relu'. I've added Max Pooling layers after the first and second convolution layers to reduce the dimensionality. Global Average Pooling is used to get spatial average of the feature maps after the third convolution layer. This is followed by 2 Dense layers, with softmax activation for the final layer to get class probabilities. I've also added Dropouts between the Dense layers to avoid overfitting.

In [62]:
from keras.layers import Conv2D, MaxPooling2D, GlobalAveragePooling2D
from keras.layers import Dropout, Flatten, Dense
from keras.models import Sequential

model = Sequential()

### TODO: Define your architecture.
model.add(Conv2D(filters=8, kernel_size=3, padding='same', activation='relu', input_shape=(224,224,3)))
model.add(MaxPooling2D(pool_size=2))
model.add(Conv2D(filters=16, kernel_size=3, padding='same', activation='relu'))
model.add(MaxPooling2D(pool_size=2))
model.add(Conv2D(filters=32, kernel_size=3, padding='same', activation='relu'))
model.add(GlobalAveragePooling2D())
model.add(Dropout(0.3))
model.add(Dense(500, activation='relu'))
model.add(Dropout(0.3))
model.add(Dense(133, activation='softmax'))
model.summary()
_________________________________________________________________
Layer (type)                 Output Shape              Param #   
=================================================================
conv2d_34 (Conv2D)           (None, 224, 224, 8)       224       
_________________________________________________________________
max_pooling2d_29 (MaxPooling (None, 112, 112, 8)       0         
_________________________________________________________________
conv2d_35 (Conv2D)           (None, 112, 112, 16)      1168      
_________________________________________________________________
max_pooling2d_30 (MaxPooling (None, 56, 56, 16)        0         
_________________________________________________________________
conv2d_36 (Conv2D)           (None, 56, 56, 32)        4640      
_________________________________________________________________
global_average_pooling2d_8 ( (None, 32)                0         
_________________________________________________________________
dropout_19 (Dropout)         (None, 32)                0         
_________________________________________________________________
dense_18 (Dense)             (None, 500)               16500     
_________________________________________________________________
dropout_20 (Dropout)         (None, 500)               0         
_________________________________________________________________
dense_19 (Dense)             (None, 133)               66633     
=================================================================
Total params: 89,165
Trainable params: 89,165
Non-trainable params: 0
_________________________________________________________________

Compile the Model

In [63]:
model.compile(optimizer='rmsprop', loss='categorical_crossentropy', metrics=['accuracy'])

(IMPLEMENTATION) Train the Model

Train your model in the code cell below. Use model checkpointing to save the model that attains the best validation loss.

You are welcome to augment the training data, but this is not a requirement.

In [64]:
from keras.callbacks import ModelCheckpoint  

### TODO: specify the number of epochs that you would like to use to train the model.

epochs = 10

### Do NOT modify the code below this line.

checkpointer = ModelCheckpoint(filepath='saved_models/weights.best.from_scratch.hdf5', 
                               verbose=1, save_best_only=True)

model.fit(train_tensors, train_targets, 
          validation_data=(valid_tensors, valid_targets),
          epochs=epochs, batch_size=20, callbacks=[checkpointer], verbose=1)
Train on 6680 samples, validate on 835 samples
Epoch 1/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.8838 - acc: 0.0099Epoch 00001: val_loss improved from inf to 4.87217, saving model to saved_models/weights.best.from_scratch.hdf5
6680/6680 [==============================] - 15s 2ms/step - loss: 4.8838 - acc: 0.0099 - val_loss: 4.8722 - val_acc: 0.0108
Epoch 2/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.8709 - acc: 0.0101Epoch 00002: val_loss improved from 4.87217 to 4.86655, saving model to saved_models/weights.best.from_scratch.hdf5
6680/6680 [==============================] - 13s 2ms/step - loss: 4.8711 - acc: 0.0100 - val_loss: 4.8666 - val_acc: 0.0144
Epoch 3/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.8601 - acc: 0.0129Epoch 00003: val_loss improved from 4.86655 to 4.84874, saving model to saved_models/weights.best.from_scratch.hdf5
6680/6680 [==============================] - 13s 2ms/step - loss: 4.8599 - acc: 0.0132 - val_loss: 4.8487 - val_acc: 0.0144
Epoch 4/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.8239 - acc: 0.0152Epoch 00004: val_loss improved from 4.84874 to 4.81708, saving model to saved_models/weights.best.from_scratch.hdf5
6680/6680 [==============================] - 13s 2ms/step - loss: 4.8241 - acc: 0.0151 - val_loss: 4.8171 - val_acc: 0.0168
Epoch 5/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.7814 - acc: 0.0170Epoch 00005: val_loss improved from 4.81708 to 4.77891, saving model to saved_models/weights.best.from_scratch.hdf5
6680/6680 [==============================] - 13s 2ms/step - loss: 4.7816 - acc: 0.0171 - val_loss: 4.7789 - val_acc: 0.0204
Epoch 6/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.7465 - acc: 0.0215Epoch 00006: val_loss improved from 4.77891 to 4.74947, saving model to saved_models/weights.best.from_scratch.hdf5
6680/6680 [==============================] - 13s 2ms/step - loss: 4.7463 - acc: 0.0214 - val_loss: 4.7495 - val_acc: 0.0251
Epoch 7/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.7106 - acc: 0.0207Epoch 00007: val_loss improved from 4.74947 to 4.71141, saving model to saved_models/weights.best.from_scratch.hdf5
6680/6680 [==============================] - 13s 2ms/step - loss: 4.7108 - acc: 0.0207 - val_loss: 4.7114 - val_acc: 0.0228
Epoch 8/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.6798 - acc: 0.0249Epoch 00008: val_loss improved from 4.71141 to 4.68513, saving model to saved_models/weights.best.from_scratch.hdf5
6680/6680 [==============================] - 13s 2ms/step - loss: 4.6797 - acc: 0.0249 - val_loss: 4.6851 - val_acc: 0.0251
Epoch 9/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.6548 - acc: 0.0239Epoch 00009: val_loss improved from 4.68513 to 4.63124, saving model to saved_models/weights.best.from_scratch.hdf5
6680/6680 [==============================] - 13s 2ms/step - loss: 4.6543 - acc: 0.0238 - val_loss: 4.6312 - val_acc: 0.0287
Epoch 10/10
6660/6680 [============================>.] - ETA: 0s - loss: 4.6220 - acc: 0.0269Epoch 00010: val_loss did not improve
6680/6680 [==============================] - 13s 2ms/step - loss: 4.6221 - acc: 0.0268 - val_loss: 4.6446 - val_acc: 0.0299
Out[64]:
<keras.callbacks.History at 0x7fc9aa033240>

Load the Model with the Best Validation Loss

In [65]:
model.load_weights('saved_models/weights.best.from_scratch.hdf5')

Test the Model

Try out your model on the test dataset of dog images. Ensure that your test accuracy is greater than 1%.

In [66]:
# get index of predicted dog breed for each image in test set
dog_breed_predictions = [np.argmax(model.predict(np.expand_dims(tensor, axis=0))) for tensor in test_tensors]

# report test accuracy
test_accuracy = 100*np.sum(np.array(dog_breed_predictions)==np.argmax(test_targets, axis=1))/len(dog_breed_predictions)
print('Test accuracy: %.4f%%' % test_accuracy)
Test accuracy: 3.5885%

Step 4: Use a CNN to Classify Dog Breeds

To reduce training time without sacrificing accuracy, we show you how to train a CNN using transfer learning. In the following step, you will get a chance to use transfer learning to train your own CNN.

Obtain Bottleneck Features

In [30]:
bottleneck_features = np.load('bottleneck_features/DogVGG16Data.npz')
train_VGG16 = bottleneck_features['train']
valid_VGG16 = bottleneck_features['valid']
test_VGG16 = bottleneck_features['test']

Model Architecture

The model uses the the pre-trained VGG-16 model as a fixed feature extractor, where the last convolutional output of VGG-16 is fed as input to our model. We only add a global average pooling layer and a fully connected layer, where the latter contains one node for each dog category and is equipped with a softmax.

In [31]:
VGG16_model = Sequential()
VGG16_model.add(GlobalAveragePooling2D(input_shape=train_VGG16.shape[1:]))
VGG16_model.add(Dense(133, activation='softmax'))

VGG16_model.summary()
_________________________________________________________________
Layer (type)                 Output Shape              Param #   
=================================================================
global_average_pooling2d_1 ( (None, 512)               0         
_________________________________________________________________
dense_5 (Dense)              (None, 133)               68229     
=================================================================
Total params: 68,229
Trainable params: 68,229
Non-trainable params: 0
_________________________________________________________________

Compile the Model

In [32]:
VGG16_model.compile(loss='categorical_crossentropy', optimizer='rmsprop', metrics=['accuracy'])

Train the Model

In [33]:
checkpointer = ModelCheckpoint(filepath='saved_models/weights.best.VGG16.hdf5', 
                               verbose=1, save_best_only=True)

VGG16_model.fit(train_VGG16, train_targets, 
          validation_data=(valid_VGG16, valid_targets),
          epochs=20, batch_size=20, callbacks=[checkpointer], verbose=1)
Train on 6680 samples, validate on 835 samples
Epoch 1/20
6640/6680 [============================>.] - ETA: 0s - loss: 13.1856 - acc: 0.0949Epoch 00001: val_loss improved from inf to 12.12150, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 2s 284us/step - loss: 13.1784 - acc: 0.0955 - val_loss: 12.1215 - val_acc: 0.1641
Epoch 2/20
6620/6680 [============================>.] - ETA: 0s - loss: 11.4947 - acc: 0.2094Epoch 00002: val_loss improved from 12.12150 to 11.23179, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 185us/step - loss: 11.4858 - acc: 0.2099 - val_loss: 11.2318 - val_acc: 0.2156
Epoch 3/20
6560/6680 [============================>.] - ETA: 0s - loss: 10.7157 - acc: 0.2724Epoch 00003: val_loss improved from 11.23179 to 10.79203, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 186us/step - loss: 10.6896 - acc: 0.2740 - val_loss: 10.7920 - val_acc: 0.2647
Epoch 4/20
6620/6680 [============================>.] - ETA: 0s - loss: 10.3818 - acc: 0.3113Epoch 00004: val_loss improved from 10.79203 to 10.71524, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 185us/step - loss: 10.3829 - acc: 0.3112 - val_loss: 10.7152 - val_acc: 0.2707
Epoch 5/20
6580/6680 [============================>.] - ETA: 0s - loss: 10.2247 - acc: 0.3269Epoch 00005: val_loss did not improve
6680/6680 [==============================] - 1s 185us/step - loss: 10.2335 - acc: 0.3268 - val_loss: 10.7254 - val_acc: 0.2647
Epoch 6/20
6600/6680 [============================>.] - ETA: 0s - loss: 9.9799 - acc: 0.3442Epoch 00006: val_loss improved from 10.71524 to 10.15404, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 185us/step - loss: 9.9738 - acc: 0.3446 - val_loss: 10.1540 - val_acc: 0.2994
Epoch 7/20
6660/6680 [============================>.] - ETA: 0s - loss: 9.5993 - acc: 0.3695Epoch 00007: val_loss improved from 10.15404 to 10.02684, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 185us/step - loss: 9.5996 - acc: 0.3696 - val_loss: 10.0268 - val_acc: 0.2982
Epoch 8/20
6660/6680 [============================>.] - ETA: 0s - loss: 9.2419 - acc: 0.3934Epoch 00008: val_loss improved from 10.02684 to 9.60877, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 184us/step - loss: 9.2387 - acc: 0.3936 - val_loss: 9.6088 - val_acc: 0.3305
Epoch 9/20
6620/6680 [============================>.] - ETA: 0s - loss: 8.9330 - acc: 0.4163Epoch 00009: val_loss improved from 9.60877 to 9.39186, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 184us/step - loss: 8.9207 - acc: 0.4172 - val_loss: 9.3919 - val_acc: 0.3545
Epoch 10/20
6640/6680 [============================>.] - ETA: 0s - loss: 8.8041 - acc: 0.4336Epoch 00010: val_loss did not improve
6680/6680 [==============================] - 1s 183us/step - loss: 8.8022 - acc: 0.4337 - val_loss: 9.4443 - val_acc: 0.3437
Epoch 11/20
6660/6680 [============================>.] - ETA: 0s - loss: 8.7035 - acc: 0.4341Epoch 00011: val_loss did not improve
6680/6680 [==============================] - 1s 184us/step - loss: 8.7040 - acc: 0.4341 - val_loss: 9.5015 - val_acc: 0.3222
Epoch 12/20
6580/6680 [============================>.] - ETA: 0s - loss: 8.4925 - acc: 0.4479Epoch 00012: val_loss improved from 9.39186 to 9.21915, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 185us/step - loss: 8.4912 - acc: 0.4482 - val_loss: 9.2192 - val_acc: 0.3545
Epoch 13/20
6620/6680 [============================>.] - ETA: 0s - loss: 8.3849 - acc: 0.4636Epoch 00013: val_loss improved from 9.21915 to 9.19279, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 186us/step - loss: 8.3850 - acc: 0.4636 - val_loss: 9.1928 - val_acc: 0.3557
Epoch 14/20
6640/6680 [============================>.] - ETA: 0s - loss: 8.3579 - acc: 0.4684Epoch 00014: val_loss did not improve
6680/6680 [==============================] - 1s 183us/step - loss: 8.3542 - acc: 0.4684 - val_loss: 9.2347 - val_acc: 0.3509
Epoch 15/20
6640/6680 [============================>.] - ETA: 0s - loss: 8.3360 - acc: 0.4753Epoch 00015: val_loss improved from 9.19279 to 9.15089, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 185us/step - loss: 8.3323 - acc: 0.4754 - val_loss: 9.1509 - val_acc: 0.3473
Epoch 16/20
6620/6680 [============================>.] - ETA: 0s - loss: 8.3090 - acc: 0.4766Epoch 00016: val_loss improved from 9.15089 to 9.02377, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 186us/step - loss: 8.3047 - acc: 0.4768 - val_loss: 9.0238 - val_acc: 0.3725
Epoch 17/20
6360/6680 [===========================>..] - ETA: 0s - loss: 8.1492 - acc: 0.4836Epoch 00017: val_loss improved from 9.02377 to 8.92991, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 184us/step - loss: 8.1590 - acc: 0.4829 - val_loss: 8.9299 - val_acc: 0.3701
Epoch 18/20
6380/6680 [===========================>..] - ETA: 0s - loss: 7.9738 - acc: 0.4936Epoch 00018: val_loss improved from 8.92991 to 8.80781, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 183us/step - loss: 7.9789 - acc: 0.4934 - val_loss: 8.8078 - val_acc: 0.3868
Epoch 19/20
6620/6680 [============================>.] - ETA: 0s - loss: 7.9094 - acc: 0.4992Epoch 00019: val_loss improved from 8.80781 to 8.72347, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 185us/step - loss: 7.9011 - acc: 0.4999 - val_loss: 8.7235 - val_acc: 0.3928
Epoch 20/20
6620/6680 [============================>.] - ETA: 0s - loss: 7.8426 - acc: 0.5038Epoch 00020: val_loss improved from 8.72347 to 8.68268, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s 186us/step - loss: 7.8277 - acc: 0.5048 - val_loss: 8.6827 - val_acc: 0.3820
Out[33]:
<keras.callbacks.History at 0x7fc9b5270198>

Load the Model with the Best Validation Loss

In [34]:
VGG16_model.load_weights('saved_models/weights.best.VGG16.hdf5')

Test the Model

Now, we can use the CNN to test how well it identifies breed within our test dataset of dog images. We print the test accuracy below.

In [35]:
# get index of predicted dog breed for each image in test set
VGG16_predictions = [np.argmax(VGG16_model.predict(np.expand_dims(feature, axis=0))) for feature in test_VGG16]

# report test accuracy
test_accuracy = 100*np.sum(np.array(VGG16_predictions)==np.argmax(test_targets, axis=1))/len(VGG16_predictions)
print('Test accuracy: %.4f%%' % test_accuracy)
Test accuracy: 40.6699%

Predict Dog Breed with the Model

In [36]:
from extract_bottleneck_features import *

def VGG16_predict_breed(img_path):
    # extract bottleneck features
    bottleneck_feature = extract_VGG16(path_to_tensor(img_path))
    # obtain predicted vector
    predicted_vector = VGG16_model.predict(bottleneck_feature)
    # return dog breed that is predicted by the model
    return dog_names[np.argmax(predicted_vector)]

Step 5: Create a CNN to Classify Dog Breeds (using Transfer Learning)

You will now use transfer learning to create a CNN that can identify dog breed from images. Your CNN must attain at least 60% accuracy on the test set.

In Step 4, we used transfer learning to create a CNN using VGG-16 bottleneck features. In this section, you must use the bottleneck features from a different pre-trained model. To make things easier for you, we have pre-computed the features for all of the networks that are currently available in Keras:

The files are encoded as such:

Dog{network}Data.npz

where {network}, in the above filename, can be one of VGG19, Resnet50, InceptionV3, or Xception. Pick one of the above architectures, download the corresponding bottleneck features, and store the downloaded file in the bottleneck_features/ folder in the repository.

(IMPLEMENTATION) Obtain Bottleneck Features

In the code block below, extract the bottleneck features corresponding to the train, test, and validation sets by running the following:

bottleneck_features = np.load('bottleneck_features/Dog{network}Data.npz')
train_{network} = bottleneck_features['train']
valid_{network} = bottleneck_features['valid']
test_{network} = bottleneck_features['test']
In [67]:
### TODO: Obtain bottleneck features from another pre-trained CNN.
bottleneck_features = np.load('bottleneck_features/DogResnet50Data.npz')
train_Resnet50 = bottleneck_features['train']
valid_Resnet50 = bottleneck_features['valid']
test_Resnet50 = bottleneck_features['test']

(IMPLEMENTATION) Model Architecture

Create a CNN to classify dog breed. At the end of your code cell block, summarize the layers of your model by executing the line:

    <your model's name>.summary()

Question 5: Outline the steps you took to get to your final CNN architecture and your reasoning at each step. Describe why you think the architecture is suitable for the current problem.

Answer: Since transfer learning is done here by using bottleneck features from Resnet50 model as input, the architecture involves only a Global Average Pooling layer to get spatial average of the feature maps from Resnet50 model followed by a Dense layer with softmax activation to get the class probabilities for 133 dog breed classes.

In [100]:
### TODO: Define your architecture.
Resnet50_model = Sequential()
Resnet50_model.add(GlobalAveragePooling2D(input_shape=train_Resnet50.shape[1:]))
Resnet50_model.add(Dense(133, activation='softmax'))

Resnet50_model.summary()
_________________________________________________________________
Layer (type)                 Output Shape              Param #   
=================================================================
global_average_pooling2d_14  (None, 2048)              0         
_________________________________________________________________
dense_27 (Dense)             (None, 133)               272517    
=================================================================
Total params: 272,517
Trainable params: 272,517
Non-trainable params: 0
_________________________________________________________________

(IMPLEMENTATION) Compile the Model

In [101]:
### TODO: Compile the model.
Resnet50_model.compile(loss='categorical_crossentropy', optimizer='rmsprop', metrics=['accuracy'])

(IMPLEMENTATION) Train the Model

Train your model in the code cell below. Use model checkpointing to save the model that attains the best validation loss.

You are welcome to augment the training data, but this is not a requirement.

In [102]:
### TODO: Train the model.
checkpointer = ModelCheckpoint(filepath='saved_models/weights.best.Resnet50.hdf5', 
                               verbose=1, save_best_only=True)

Resnet50_model.fit(train_Resnet50, train_targets, 
          validation_data=(valid_Resnet50, valid_targets),
          epochs=10, batch_size=32, callbacks=[checkpointer], verbose=1)
Train on 6680 samples, validate on 835 samples
Epoch 1/10
6432/6680 [===========================>..] - ETA: 0s - loss: 1.8003 - acc: 0.5693Epoch 00001: val_loss improved from inf to 0.82848, saving model to saved_models/weights.best.Resnet50.hdf5
6680/6680 [==============================] - 2s 269us/step - loss: 1.7621 - acc: 0.5772 - val_loss: 0.8285 - val_acc: 0.7545
Epoch 2/10
6208/6680 [==========================>...] - ETA: 0s - loss: 0.4604 - acc: 0.8611Epoch 00002: val_loss improved from 0.82848 to 0.66518, saving model to saved_models/weights.best.Resnet50.hdf5
6680/6680 [==============================] - 1s 108us/step - loss: 0.4568 - acc: 0.8621 - val_loss: 0.6652 - val_acc: 0.7940
Epoch 3/10
6464/6680 [============================>.] - ETA: 0s - loss: 0.2577 - acc: 0.9202Epoch 00003: val_loss improved from 0.66518 to 0.64502, saving model to saved_models/weights.best.Resnet50.hdf5
6680/6680 [==============================] - 1s 105us/step - loss: 0.2588 - acc: 0.9204 - val_loss: 0.6450 - val_acc: 0.7928
Epoch 4/10
6464/6680 [============================>.] - ETA: 0s - loss: 0.1619 - acc: 0.9499Epoch 00004: val_loss improved from 0.64502 to 0.62175, saving model to saved_models/weights.best.Resnet50.hdf5
6680/6680 [==============================] - 1s 105us/step - loss: 0.1630 - acc: 0.9496 - val_loss: 0.6218 - val_acc: 0.8096
Epoch 5/10
6496/6680 [============================>.] - ETA: 0s - loss: 0.1075 - acc: 0.9708Epoch 00005: val_loss did not improve
6680/6680 [==============================] - 1s 104us/step - loss: 0.1072 - acc: 0.9707 - val_loss: 0.6548 - val_acc: 0.8084
Epoch 6/10
6496/6680 [============================>.] - ETA: 0s - loss: 0.0752 - acc: 0.9778Epoch 00006: val_loss improved from 0.62175 to 0.61706, saving model to saved_models/weights.best.Resnet50.hdf5
6680/6680 [==============================] - 1s 104us/step - loss: 0.0749 - acc: 0.9781 - val_loss: 0.6171 - val_acc: 0.8275
Epoch 7/10
6496/6680 [============================>.] - ETA: 0s - loss: 0.0503 - acc: 0.9881Epoch 00007: val_loss did not improve
6680/6680 [==============================] - 1s 103us/step - loss: 0.0508 - acc: 0.9883 - val_loss: 0.6256 - val_acc: 0.8407
Epoch 8/10
6400/6680 [===========================>..] - ETA: 0s - loss: 0.0358 - acc: 0.9919Epoch 00008: val_loss did not improve
6680/6680 [==============================] - 1s 103us/step - loss: 0.0359 - acc: 0.9916 - val_loss: 0.6444 - val_acc: 0.8240
Epoch 9/10
6368/6680 [===========================>..] - ETA: 0s - loss: 0.0245 - acc: 0.9948Epoch 00009: val_loss did not improve
6680/6680 [==============================] - 1s 105us/step - loss: 0.0256 - acc: 0.9945 - val_loss: 0.6791 - val_acc: 0.8072
Epoch 10/10
6368/6680 [===========================>..] - ETA: 0s - loss: 0.0209 - acc: 0.9951Epoch 00010: val_loss did not improve
6680/6680 [==============================] - 1s 104us/step - loss: 0.0217 - acc: 0.9949 - val_loss: 0.7237 - val_acc: 0.8251
Out[102]:
<keras.callbacks.History at 0x7fc9a8f08710>

(IMPLEMENTATION) Load the Model with the Best Validation Loss

In [103]:
### TODO: Load the model weights with the best validation loss.
Resnet50_model.load_weights('saved_models/weights.best.Resnet50.hdf5')

(IMPLEMENTATION) Test the Model

Try out your model on the test dataset of dog images. Ensure that your test accuracy is greater than 60%.

In [104]:
### TODO: Calculate classification accuracy on the test dataset.
# get index of predicted dog breed for each image in test set
Resnet50_predictions = [np.argmax(Resnet50_model.predict(np.expand_dims(feature, axis=0))) for feature in test_Resnet50]

# report test accuracy
test_accuracy = 100*np.sum(np.array(Resnet50_predictions)==np.argmax(test_targets, axis=1))/len(Resnet50_predictions)
print('Test accuracy: %.4f%%' % test_accuracy)
Test accuracy: 81.8182%

(IMPLEMENTATION) Predict Dog Breed with the Model

Write a function that takes an image path as input and returns the dog breed (Affenpinscher, Afghan_hound, etc) that is predicted by your model.

Similar to the analogous function in Step 5, your function should have three steps:

  1. Extract the bottleneck features corresponding to the chosen CNN model.
  2. Supply the bottleneck features as input to the model to return the predicted vector. Note that the argmax of this prediction vector gives the index of the predicted dog breed.
  3. Use the dog_names array defined in Step 0 of this notebook to return the corresponding breed.

The functions to extract the bottleneck features can be found in extract_bottleneck_features.py, and they have been imported in an earlier code cell. To obtain the bottleneck features corresponding to your chosen CNN architecture, you need to use the function

extract_{network}

where {network}, in the above filename, should be one of VGG19, Resnet50, InceptionV3, or Xception.

In [106]:
### TODO: Write a function that takes a path to an image as input
### and returns the dog breed that is predicted by the model.
from extract_bottleneck_features import *

def Resnet50_predict_breed(img_path):
    # extract bottleneck features
    bottleneck_feature = extract_Resnet50(path_to_tensor(img_path))
    # obtain predicted vector
    predicted_vector = Resnet50_model.predict(bottleneck_feature)
    # return dog breed that is predicted by the model
    return dog_names[np.argmax(predicted_vector)]

Step 6: Write your Algorithm

Write an algorithm that accepts a file path to an image and first determines whether the image contains a human, dog, or neither. Then,

  • if a dog is detected in the image, return the predicted breed.
  • if a human is detected in the image, return the resembling dog breed.
  • if neither is detected in the image, provide output that indicates an error.

You are welcome to write your own functions for detecting humans and dogs in images, but feel free to use the face_detector and dog_detector functions developed above. You are required to use your CNN from Step 5 to predict dog breed.

Some sample output for our algorithm is provided below, but feel free to design your own user experience!

Sample Human Output

(IMPLEMENTATION) Write your Algorithm

In [176]:
### TODO: Write your algorithm.
### Feel free to use as many code cells as needed.
from IPython.display import display, Image
    
def dog_app(img_path):    
    human_detected = face_detector(img_path)
    dog_detected = dog_detector(img_path)
    dog_breed = Resnet50_predict_breed(img_path)
    
    if human_detected and not dog_detected:
        print('Hello, human!')
        print('You look like the dog breed \'', dog_breed, '\'.')
    elif dog_detected and not human_detected:
        print('Hello, dog!')
        print('You seem to be one of the breed \'', dog_breed, '\'.')        
    elif human_detected and dog_detected:
        print('This picture seem to have both human and dog in it.')
    elif not human_detected and not dog_detected:
        print('This picture doesn\'t seem to have either a human or a dog in it.')
    
    img = Image(img_path, width=500)
    display(img)
    

Step 7: Test Your Algorithm

In this section, you will take your new algorithm for a spin! What kind of dog does the algorithm think that you look like? If you have a dog, does it predict your dog's breed accurately? If you have a cat, does it mistakenly think that your cat is a dog?

(IMPLEMENTATION) Test Your Algorithm on Sample Images!

Test your algorithm at least six images on your computer. Feel free to use any images you like. Use at least two human and two dog images.

Question 6: Is the output better than you expected :) ? Or worse :( ? Provide at least three possible points of improvement for your algorithm.

Answer:

The algorithm first detects whether the image is that of a human or a dog. If it is a dog, it detects the breed. If it is a human, it detects which dog breed the person resembles. If the algorithm detects that there is a human as well as a dog in the image, then it won't display the detected dog breed name. The algorithm also detects if the image has neither a human nor a dog in it. All these scenarios are covered in the test with sample images given below.

Output is as per my expectations (my expectations were not very high to start with). There is still a lot of room for improvement. Three specific points of improvements based on the test on sample images are:

  • The model is mis-classifying a Dobermann as a Dachshund. Both breeds have some similarity between them, though their sizes are very different (Dachshund is smaller than Dobermann). The model has to improve to detect such variations. Size of an objects in images seems to be hard to learn.
  • The algorithm did not detect a human (or a dog) in the picture of Sachin Tendulkar. The image has his face turned towards the side. This might be the reason why the algorithm failed. May be a better deep learning based human face detection model might help here. Image augmentation might also help.
  • The model seems to be confused when presented with an image with 2 dogs of different breeds in it. The algorithm cannot determine if there are multiple dogs in the picture. This situation should be improved.
In [181]:
## TODO: Execute your algorithm from Step 6 on
## at least 6 images on your computer.
## Feel free to use as many code cells as needed.
import os

testdir = 'appTestImages'
testfiles = np.array(['bulldog.jpg', 'vin-diesel.jpg', 'dachshund.jpg', 'golden-retriever.jpg', 
                      'lionel-messi.jpg', 'george-clooney-golden-retriever.jpg', 'roadster.jpg', 
                      'dobermann.jpg', 'sachin-tendulkar.jpg', 'husky-and-pitbull.jpg',
                      ])

for i in range(len(testfiles)):
    img_path = os.path.join(testdir, testfiles[i])
    print('-' * 100)
    print('\nTest', i + 1, '| Filename:', testfiles[i], '\n')
    print('App response:\n')
    dog_app(img_path)
----------------------------------------------------------------------------------------------------

Test 1 | Filename: bulldog.jpg 

App response:

Hello, dog!
You seem to be one of the breed ' Bulldog '.
----------------------------------------------------------------------------------------------------

Test 2 | Filename: vin-diesel.jpg 

App response:

Hello, human!
You look like the dog breed ' Dogue_de_bordeaux '.
----------------------------------------------------------------------------------------------------

Test 3 | Filename: dachshund.jpg 

App response:

Hello, dog!
You seem to be one of the breed ' Dachshund '.
----------------------------------------------------------------------------------------------------

Test 4 | Filename: golden-retriever.jpg 

App response:

Hello, dog!
You seem to be one of the breed ' Golden_retriever '.
----------------------------------------------------------------------------------------------------

Test 5 | Filename: lionel-messi.jpg 

App response:

Hello, human!
You look like the dog breed ' Dachshund '.
----------------------------------------------------------------------------------------------------

Test 6 | Filename: george-clooney-golden-retriever.jpg 

App response:

This picture seem to have both human and dog in it.
----------------------------------------------------------------------------------------------------

Test 7 | Filename: roadster.jpg 

App response:

This picture doesn't seem to have either a human or a dog in it.
----------------------------------------------------------------------------------------------------

Test 8 | Filename: dobermann.jpg 

App response:

Hello, dog!
You seem to be one of the breed ' Dachshund '.
----------------------------------------------------------------------------------------------------

Test 9 | Filename: sachin-tendulkar.jpg 

App response:

This picture doesn't seem to have either a human or a dog in it.
----------------------------------------------------------------------------------------------------

Test 10 | Filename: husky-and-pitbull.jpg 

App response:

Hello, dog!
You seem to be one of the breed ' Alaskan_malamute '.